Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 66)

4–10 Downloading Match Codes via DH485 Protocol with an SLC 5/03
t
or SLC 5/04
t
Controller
Publication 2755-6.8
Configure the Serial Port
1. Click the Serial Port button from the Project dialog.
2. Set the parameters as follows:
•
From the Protocol list box, select DH-485
•
From the Baud Rate list box, select 19,200
•
Click the Scanner Protocol button
•
From the Connection list box, select RS485
The Serial Port must match the host configuration.
3. Click the Edit button to select either DH485 Slave Mode or
DH485 Master Mode.