Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 27)

1–10 Using the Auto-Load Function
Publication 2755-6.8
From the main Project dialog, click the Send Device button to
download the configuration to the bar code reader.
Use the Monitor dialog to verify bar code labels as they are decoded.
When the application is running, bar code data is autoloaded by
triggering the decoder (with Package Detect) when the desired
symbol is scanned and decoded. If the bar code data is unreadable or
does not match the autoloaded match string, I/O LED 1 turns on.
The following illustration shows the auto-load sequence using a
Package Detect as a decoder trigger.
Package Detect
Auto-Load Trigger
Auto-Load Trigger remains on until
Package Detect is turned off
Auto-Load trigger prior to
Package Detect
For more information on using Auto-Load, refer to chapter 10 in the
AdaptaScan Software User Manual (Publication No. 2755-838).
Sending the Configuration
to the Reader
Running the Application