Fluke Biomedical Cufflink - Manual (Page 102)

Cufflink
Operators Manual
3-28
MKARM30
Use this command to set blood pressure simulation to Adams Adult 100/65, with a heart
rate of 80 BPM. There are no parameters for this command.
Example
Simulate a specific adult BP of 100/65 at 80 BPM.
Command Mkarm30
Results The Analyzer runs the Adams Adult 100/65, heart rate is set to 80
BPM.
Returned Data *
MKARM40
Use this command to set blood pressure simulation to Adams Adult 120/80, with a heart
rate of 120 BPM. There are no parameters for this command.
Example
Simulate a specific adult BP of 120/80 at 120 BPM.
Command Mkarm40
Results The Analyzer runs the Adams Adult 120/80, heart rate is set to 120
BPM.
Returned Data *
MKARM50
Use this command to set blood pressure simulation to Adams Adult 150/100, with a heart
rate of 120 BPM. There are no parameters for this command.
Example
Simulate a specific adult BP of 150/100 at 120 BPM.
Command Mkarm50
Results The Analyzer runs the Adams Adult 150/100, heart rate is set to 120
BPM.
Returned Data *
MKARM60
Use this command to set blood pressure simulation to Adams Adult 200/150, with a heart
rate of 160 BPM. There are no parameters for this command.
Example
Simulate a specific adult BP of 200/150 at 160 BPM.
Command Mkarm60
Results The Analyzer runs the Adams Adult 200/150, heart rate is set to 160
BPM.
Returned Data *