Fluke Biomedical Cufflink - Manual (Page 19)

Introduction and Specifications
General Safety Considerations
1
1-7
Warnings and Cautions
A Warning identifies hazardous conditions and actions that could cause bodily harm or
death.
A Caution identifies conditions and actions that could damage the Analyzer, the
equipment under test, or cause permanent loss of data.
XW Warning
To avoid possible electrical shock or personal injury, follow
these guidelines:
•
Use this Analyzer only in the manner specified by the
manufacturer.
•
Do not use the product if it operates abnormally.
•
Do not connect the Analyzer to a patient or equipment
connected to a patient. The Analyzer is intended for
equipment evaluation only and should never be used in
diagnostics, treatment or in any other capacity where the
Analyzer would come in contact with a patient.
•
Do not use the product in wet locations, around explosive
gases or dust.
•
Never open the Analyzer's case. Dangerous voltages are
present. There are no user replaceable parts in the
Analyzer.
•
Have the Analyzer serviced only by qualified personnel.
•
The Analyzer must be properly earthed. Only use a supply
socket that has a protective earth contact. If there is any
doubt as to the effectiveness of the supply socket earth, do
not connect the Analyzer.
•
Do not use a two-conductor adapter or extension cord; this
will break the protective ground connection.
W Caution
To avoid damage to the Analyzer or adverse affects on its
performance, follow these guidelines :
•
Do not expose the system to temperature extremes. Ambient
temperatures should remain between 0 °C and 50 °C. System
performance may be adversely affected if temperatures fluctuate
above or below this range.
•
Clean the Analyzer only by wiping it down with a clean, lint-free
cloth dampened with a mild detergent solution. Do not spray
liquid directly on or immerse the unit.