Fluke Biomedical Cufflink - Manual (Page 62)

Cufflink
Operators Manual
2-34
Note
If an auto sequence is configured to print and is run before a printer is
properly connected to the Analyzer, a Printer Not Ready message
displays.If a printout is not desired, select Edit and make sure the Print
BP Results line says NO .
Utilities
The auto sequence utilities, accessible from the Utility submenu, lets the user edit, view,
name, and print auto sequences. To access any of the utilities described below from the
Utility submenu (the Auto Sequence Utilities screen), highlight the desired utility
option and press the Ent key. The appropriate screen displays.
Edit
The Edit utility lets the user change the settings of an auto sequence.
To modify the content of an auto sequence:
1. From the
Auto Sequence Utilities screen, highlight Edit and select an auto
sequence with the function keys. The three Analyzer auto sequence editing pages are
shown below:
F1 F2 F3 F4 F5
Auto-1
Pressure Test. : YES
Leak Test..... : YES
Pop Off Test.. : YES
Print BP Results YES
Store No/Dec PgDn PgUp Yes/Inc
fcv112.eps
F1 F2 F3 F4 F5
Auto-1 2
Blood Pressure HR (BPM) CYCLES
(1) 60/ 30 ( 40) Adult 40 1
(2) 80/ 50 ( 62) Adult 60 1
(3) 100/ 55 ( 75) Adult 80 1
(4) 120/ 80 ( 90) Adult 80 1
Store No/Dec PgDn PgUp Yes/Inc