Fluke Biomedical Cufflink - Manual (Page 59)

Operation
Establishing Communications
2
2-31
Establishing Communications
The Comm function allows the user to modify and test the Analyzer’s RS232
configuration. These functions are accessed from the Comm submenu:
F1 F2 F3 F4 F5
Select BP Press Util Comm Comm Auto
Configure Configure
Comm Test
Set baud date, parity and handshake
fcv106.eps
Configuring RS232
To configure the RS232 communications settings:
1. From the
Comm submenu, highlight Configure and press the Ent key. The
Configure screen displays:
F1 F2 F3 F4 F5
Baud Bits Parity Stop Flow
Port 1: Rate Char Mode Bits Control
---- ---- ------ ----- --------
Current:
9600 8 none 1 XON/XOFF
Adjust: 9600 8 none 1 XON/XOFF
ESC=Exit, ENT=Store <-> Select, ][ Modify
fcv107.eps
2. Press the Left and Right arrow keys to select the desired parameter and the Up and
Down arrow keys to modify its value. The available settings are listed in Table
2-12.