Fluke Biomedical Cufflink - Manual (Page 57)

Operation
Utility Functions
2
2-29
Calculating U2
3. Then, a value is displayed for U2 (example: 3B29) :
3B29
4. Verify this number with the Fluke Biomedical Service Center. The checksum value
changes with every Analyzer software revision.
5. Press Esc to exit the ROM Checksums Test and return to the System Utilities
screen.
Config Init
The Config Init option reinstalls factory default values for Pop Time, Comm port, and
auto sequences, as listed in Tables 2-10 and.2-11
Table 2-10. Pop Time and Comm Port Default Values
Parameter Value
Pop Time 1 second
Communications
Baud Rate 9600
Bits/Character 8
Parity None
Stop Bits 1
Flow Control Xon/Xoff