Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 128)

Description Setting or button
The name of the destination, as it appears in the Send Destinations list
in the GV STRATUS application. This can be any name, as appropriate
for your workflow. Send Name
The K2 Summit/SAN system to which the asset is sent. Only systems
that have been configured in K2 Storage settings can be selected from
the drop-down list. Local K2 Summit/SAN systems must be configured
in K2 SAN Storage settings or K2 Standalone Storage settings. Remote
K2 Summit/SAN systems must be configured in Remote K2 Storage
settings. K2
Triggers the Conform Engine software component to render a complex
asset as a simple clip. It is recommended that the Send Name indicate
that the destination is configured for conform. Conform on Send
The bin on the selected K2 system to which the asset is sent. Select a working bin
Web Monitor Config settings
These settings are optional on GV STRATUS systems.
128 GV STRATUS Installation and Service Manual 2013 12 19
Reference to GV STRATUS Control Panel settings