Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 255)

2. Connect one end of the crossover cable to the device server and the other end to RS422 serial
cable to connect to Jupiter.
3. Connect an ethernet cable from the device server to a network point on your LAN.
4. Connect the power supply to the device server.
Related Topics
Installing Virtual COM port software (Jupiter only) on page 255
Installing Virtual COM port software (Jupiter only)
After the virtual COM port has been configured, you need to install the software.
1. Insert the DIGI CD in your CD ROM drive.
2013 12 19 GV STRATUS Installation and Service Manual 255
Administering and maintaining the GV STRATUS system