Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 340)

Configure File System Client Configuration page - GV STRATUS Proxy server
This system does not function as a file system server. It does function as a file system client, which
is validated from this page.
1. Do not select Reserved Bandwidth unless instructed to do so by Grass Valley. This system is
usually not configured for RVIO.
2. Click Check .
3. When the wizard reports that the configuration is correct, click Next .
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
GV STRATUS server configuration is complete.
Related Topics
Synchronizing K2Config information to GV STRATUS Control Panel on page 229
K2Config Proxy Storage set up
Only systems with proxy on a dedicated Proxy Storage system (B1, C1) require this process.
If you received your system pre-configured from Grass Valley, your Proxy Storage system is already
set up, so you can skip these tasks. Otherwise, work through the tasks in this section sequentially
to configure a non-redundant Proxy Storage system. This corresponds to a Tier 3 K2 SAN.
Related Topics
Synchronizing K2Config information to GV STRATUS Control Panel on page 229
340 GV STRATUS Installation and Service Manual 2013 12 19
Complete system set up and configuration