Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 70)

• The SiteConfig PC does not have a network drive mapped to an administrative share (such as
C$) on a device on which you are checking software.
Do the following steps on the devices on which you are installing or upgrading software.
1. In the Software Deployment | Deployment Groups tree view, right-click the top-most node for the
group or any individual device and select Check Software .
NOTE: If you have access problems, verify that the administrator account on the device has
credentials as currently configured in SiteConfig.
NOTE: If an "Unable to copy ... to target" error appears for a device that has Grass Valley
Embedded Security, put Embedded Security in Update mode.
The Check Software dialog box appears. SiteConfig searches for software on the selected device
or devices and gathers information. Progress is reported.
2. When the check is complete, close the Check Software dialog box.
An updated list of all currently installed software is displayed in the Software Deployment | Devices
| Installed Software list view. If software is a SiteConfig managed software package, information is
displayed in the Managed Package and Deployment Group columns.
Add software package to deployment group for GV STRATUS client PCs
Prerequisites for this task are as follows:
• The GV STRATUS devices to which you are deploying software have their SiteConfig roles
correctly configured.
• The GV STRATUS devices to which you are deploying software are in a deployment group.
GV STRATUS Client PC low-resolution (proxy):
• SiteConfig "Add Device":
• Family: GV STRATUS
NOTE: Do not select the EDIUS family.
• Device Type: GV STRATUS Client
• Model: GV STRATUS PC or GV STRATUS/EDIUS PC (if using EDIUS XS)
• SiteConfig roles:
• GV STRATUS Application
• EDIUS (Required for EDIUS XS)
NOTE: If initial (not upgrade) install, first install GV STRATUS software, then install
EDIUS software.
• Software packages:
• GrassValley_STRATUSClient_x.x.x.cab , which contains the following cab files that apply
to this device:
• GrassValley_STRATUS_Application_x.x.x.cab
• EDIUS_x.x.x.cab (Required for EDIUS XS)
NOTE: If initial (not upgrade) install, first install GV STRATUS software, then install
EDIUS software.
70 GV STRATUS Installation and Service Manual 2013 12 19
Commissioning a system