Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 52)

Aurora Playout application ports
Port settings must be open so that the Aurora Playout client application can connect to servers as
follows:
Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and Aurora
Playout clients outgoing. 2000
Protocol: TCP. Used by SDB Server incoming, and by GV STRATUS and Aurora
Playout clients outgoing. 2001
Protocol: TCP. Used by backup SDB Server incoming, and by GV STRATUS and
Aurora Playout clients outgoing. 2002
Protocol: TCP. Used by backup SDB Server incoming, and by GV STRATUS and
Aurora Playout clients outgoing. 2003
Protocol: TCP. Used by XMOS Server incoming, and by GV STRATUS and Aurora
Playout clients outgoing. 3000
Protocol: TCP. Used by XMOS Server incoming, and by GV STRATUS and Aurora
Playout clients outgoing. 3001
Protocol: TCP. Used by Grass Valley AppService for 3rd party applications to
communicate using AMP protocol. Used by SDB Server and Aurora Playout 3811
outgoing AMP communication to control playout channels. Used by K2 Summit
systems for playout.
Install/configure for SiteConfig support on client PC
All systems require this process. Prepare each GV STRATUS client PC so that it can be managed
by SiteConfig.
Related Topics
About GV STRATUS client PCs on page 157
Installing and configuring SiteConfig support for client PCs on corporate LAN
Before installing software, make sure the client PC meets system requirements, especially regarding
Windows operating system and .NET version.
Use this topic to install software (if necessary) and configure PCs that are on the corporate LAN to
prepare them for SiteConfig software deployment. This topic does not prepare the PC for SiteConfig
network configuration, which requires that the SiteConfig Discovery Agent be installed. Since IT
policies at many customer site's prohibit installation of software such as the SiteConfig Discovery
Agent on corporate LAN PCs, this topic prepares the PC for software deployment only, without
installing the Discovery Agent.
1. On the PC that hosts the SiteConfig application, navigate to the directory at which SiteConfig
is installed.
By default the location is C:\Program Files (x86)\Grass Valley\SiteConfig .
2. Copy the contents of the ConnectivityKit directory to a USB thumb drive, network drive, or
some other shared location to make it easier to distribute to each corporate LAN PC.
52 GV STRATUS Installation and Service Manual 2013 12 19
Commissioning a system