Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 371)

6. If you have multiple K2 SAN systems, repeat steps to configure an MDI for each K2 SAN system
on your GV STRATUS system.
Next, configure Proxy Encoder settings.
Related Topics
MDI and Encoder logical names convention on page 183
Summit MDI SAN settings on page 95
Configuring licenses and roles settings: Required
All systems require this process. Assign GV STRATUS licenses and roles to groups and users.
Prerequisites:
• The groups and users to which you are assigning licenses and roles must be set up, either on a
workgroup or on a domain, on the following:
• The GV STRATUS server with role of Common Services.
• The GV STRATUS server with role of Common Services must have the site's GV STRATUS
licenses installed.
If on a network Workgroup, to configure Authorization Manager settings, you must be running GV
STRATUS Control Panel on the GV STRATUS Core server.
When you receive your GV STRATUS system from Grass Valley, it is configured to workgroup,
with all licenses and roles assigned to GVAdmin by default. Change the default configuration as
appropriate for your site.
If you have temporary GV STRATUS licenses, GV STRATUS Control Panel allows you to configure
Authorization Manager settings while you are waiting to install your permanent licenses.
Authorization Manager displays indicators informing you of your license status.
2013 12 19 GV STRATUS Installation and Service Manual 371
Complete system set up and configuration