Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 258)

8. Click Finish .
The setup wizard will install the software.
9. Click Finish after the installation is done.
NOTE: Once you have configured the virtual COM port, you need to enter the COM port
number in the router configuration panel of the GV STRATUS Control Panel.
10. To avoid unnecessary timeouts on RS422 communication, you need to set the Digi One SP
optimization routine to Latency.
This can be done by launching the configuration page on your web browser. If needed, the default
username/password for the Digi One configuration page is root/dbps.
258 GV STRATUS Installation and Service Manual 2013 12 19
Administering and maintaining the GV STRATUS system