Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 357)

4. When the wizard reports that the configuration is correct, click Next .
If you get a “The V: will not be available until this device is rebooted…” message, you can safely
continue now and reboot later when instructed to do so.
GV STRATUS server configuration is complete.
Related Topics
Synchronizing K2Config information to GV STRATUS Control Panel on page 229
GV STRATUS Control Panel system configuration process
All systems require this process. Use GV STRATUS Control Panel to configure the GV STRATUS
system for your site's workflow.
If you received your GV STRATUS system pre-configured from Grass Valley, skip configuration
tasks and do the test tasks only.
1. Configure Control Panel Service Host in applications on page 358. All systems require this
process. Configure SiteConfig and K2Config to reference the Control Panel Service Host.
2. Install the GV STRATUS Control Panel application with SiteConfig on page 358. All systems
require this process.
3. Configuring GV STRATUS Control Panel: Required settings on page 360. All systems, all
workflows, require this process. Configure GV STRATUS Database, proxy, Summit, proxy
encoder, and other settings that the GV STRATUS system requires regardless of the site's unique
workflow or system design.
4. Test GV STRATUS configuration settings on page 373. All systems require this process.
5. Reference to settings . All systems require GV STRATUS Control Panel settings, as appropriate
for the site's unique workflow and GV STRATUS licenses.
2013 12 19 GV STRATUS Installation and Service Manual 357
Complete system set up and configuration