Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 264)

2. On the Ethernet Client Names and IP Addresses section of the RCL Server Configuration window,
enter the machine name and IP address of your GV STRATUS Core Services Server.
3. Log out from Encore OUI.
4. In the GV STRATUS Contol Panel application, launch the router configuration panel to configure
the Encore router connection.
5. If needed, you can customize the level setting on the Connection tab. Select the appropriate level
from the drop-down list for video, audio and timecode.
Select 0 (zero) for the video level if video is the first level in your router control system, 1 if it
is the second level and so on.
6. Click Save to save changes.
Related Topics
Router Connection settings on page 145
Router Sources settings on page 147
Setting up GV STRATUS in ENPS
The GV STRATUS application needs to be installed on ENPS client machines in order to use the
GV STRATUS ActiveX within ENPS.
To set up GV STRATUS as ActiveX device in ENPS, you need to modify your ENPS configuration.
1. On the ENPS server, find the enps.ini file and add the following to the [ENPS] section:
QTMediaExtensions=.mov,.mp4
2. On an ENPS client, log in as the administrator and start up ENPS.
264 GV STRATUS Installation and Service Manual 2013 12 19
Administering and maintaining the GV STRATUS system