Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 236
6. Install SQL.
7. Install SiteConfig Discovery Agent.
8. Do any Windows High Priority updates that are not already installed.
9. Install GV STRATUS software.
10. On proxy share security settings make sure the local "Everyone" has read permission.
11. Add the internal system account, which by default is GVAdmin, to the local Administrators
group and on proxy share security settings give that account full permissions.
Related Topics
on page 231
Restoring a GV STRATUS Core server on a Dell platform
1. Make hardware connections as follows:
a) Connect keyboard, monitor, and mouse.
b) Connect the image LAN cable to the first motherboard port (left most).
c) Connect 3 LAN cables to the last three motherboard ports.
d) Connect both AC power cords.
e) Connect an Acronis bootable USB stick to one of the front USB ports.
2. Restore from the generic image.
This includes the following:
a) Restore disk image.
b) Do Windows setup.
Enter the Administrator password (adminGV!) and the server's computer name.
3. Verify server partitions and configure if necessary.
4. Restore network and system configuration.
This includes the following:
a) Name adapters.
b) Reorder adapters.
c) Set power management settings.
d) Configure static IP address.
5. Install SQL.
6. Install SiteConfig Discovery Agent.
7. Do any Windows High Priority updates that are not already installed.
Related Topics
on page 231
Restoring a GV STRATUS Core Server on a FT Server platform from a generic image
This task applies to both Type I and Type II FT Server models.
1. Disconnect network cables.
2. Disconnect power cabling from bottom CPU/IO module.
236
GV STRATUS Installation and Service Manual
2013 12 19
Administering and maintaining the GV STRATUS system