Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 55)

3. To install and configure SiteConfig support locally at a control network PC, do the following:
a) Copy the contents of the ConnectivityKit directory and the DiscoveryAgent Setup directory
to the control network PC.
b) On the control network PC, check the Microsoft .NET Framework version and compare to
system requirements for the software you intend to deploy with SiteConfig.
c) If necessary, install .NET software and the required Windows update.
You can find the installation file for a .NET version in the ConnectivityKit directory.
d) On the control network PC, run \DiscoveryAgent Setup\setup.exe .
The install wizard opens.
e) Work through the install wizard and when prompted to select the device type, select
GenericDevice .
f) Finish the install wizard.
g) Open firewall port settings on the PC as follows.
Protocol: TCP. Used by SDB and XMOS Server and NAS. Used by SiteConfig.
File and printer sharing. Used by CIFS/SMB. 445
TCP: Used by Remote Desktop for use by SiteConfig. 3389
TCP: Used by GV ProductFrame Configuration Service, ProductFrame
Discovery Agent Service for use by SiteConfig. Used by GV NetConfig
Service. gv-pf. UDP: Used by GV NetConfig Service. gv-pf. 18262
UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig
Device Broadcast/Unicast Protocol. Used by SiteConfig. Sent by ControlPoint,
received by Devices 18263
UDP: Used by ProductFrame Discovery Agent Service for GV NetConfig
Controller Protocol. Used by SiteConfig. Sent by Devices, received by
ControlPoint 18264
HTTP/TCP: Used by Grass Valley K2 Config for K2Config application
connection between a control point PC and the K2 system device configured.
Used for most functions. 49168
TCP: Used by Grass Valley K2 Config for K2Config application connection
between a control point PC and the K2 system device configured. Used for a
few functions that require longer time periods. 49169
h) Restart the control network PC.
The control network PC is now prepared for SiteConfig discovery, network configuration, and
software deployment.
Next, add client PCs as placeholder devices to the SiteConfig system description.
Related Topics
System requirements for GV STRATUS client PC on page 47
2013 12 19 GV STRATUS Installation and Service Manual 55
Commissioning a system