Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 212)

Configuring multisite playout workflow
The following are prerequisites for this workflow:
• Both local and remote GV STRATUS systems must have multisite licenses.
• The FTP networks on the local and remotes sites must be able to communicate with each other.
• Aurora Playout must be part of the remote GV STRATUS system.
Configure settings in the local site GV STRATUS Control Panel application.
1. Configure the remote site in Remote Sites settings.
2. Configure one or more remote K2 systems in Remote K2 Storage settings.
3. Configure the remote K2 systems as Send Destination in Send Destinations .
Only those K2 systems configured in Remote K2 Storage are available for configuration as Send
Destinations.
4. Configure the remote Playout system in Playout | Remote Sites .
Related Topics
Remote Sites settings on page 89
Remote K2 Storage SAN Add/Modify settings on page 113
Send Destinations settings on page 126
Playout Remote Sites settings on page 142
Configuring multisite send to K2 system workflow
The following are prerequisites for this workflow:
• The local GV STRATUS system must have a multisite license.
Configure settings in the local site GV STRATUS Control Panel application.
1. Configure one or more remote K2 systems in Remote K2 Storage settings.
2. Configure the remote K2 systems as Send Destination in Send Destinations .
Only those K2 systems configured in Remote K2 Storage are available for configuration as Send
Destinations.
Related Topics
Remote K2 Storage SAN Add/Modify settings on page 113
Send Destinations settings on page 126
Working with SiteConfig
Topics in this section provide instructions for using the SiteConfig application.
Related Topics
Understanding and using SiteConfig on page 176
212 GV STRATUS Installation and Service Manual 2013 12 19
Administering and maintaining the GV STRATUS system