Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 339)

Configure Network Configuration page - GV STRATUS server
This server has a control network connection only, so if it is configured correctly, there is no other
configuration to do on this page.
1. Verify that the top port is configured correctly.
The top port is the port over which the K2Config application is communicating. If correctly
configured, it is already assigned the control network IP address, as displayed on this page.
2. Click Next .
The File System Server Configuration page opens.
2013 12 19 GV STRATUS Installation and Service Manual 339
Complete system set up and configuration