Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 463)

f) Click OK to save settings and close.
5. If you have multiple EDIUS XRE Servers, repeat the previous step only on each of your additional
servers, to configure them as XRE Node Servers. Do not configure the additional servers as XRE
Management Servers.
Related Topics
Access K2 storage for EDIUS using standard convention on page 74
Workflow Server set up process
Only systems with a Workflow Server require this process. Use SiteConfig for network setup and
software install. On the GV STRATUS Core server, use SabreTooth and install the
STRATUS-RULES license and optionally STRATUS-XCODECONTROLCARBONCODER and
STRATUS-XCODECONTROLVANTAGE licenses.
If you received your Conform Server already set up from Grass Valley, skip set up tasks and do the
test task only.
1. SiteConfig Workflow Server network set up on page 463. Only systems with a Workflow Server
require this process.
2. SiteConfig Workflow Server software install on page 465. Only systems with a Workflow Server
require this process.
3. SabreTooth Rules, Xcode license process on page 467. Only the GV STRATUS server with role
of Common Services requires this process.
SiteConfig Workflow Server network set up
Only systems with a Workflow Server require this process.
If you received your system already set up from Grass Valley, your Workflow Server or Servers
are already included in the SiteConfig system description and set up on the network, so you can skip
these tasks. Otherwise, work through the topics in this section.
Adding a Workflow Server to the SiteConfig system description
Prerequisites for this task are as follows:
• Workflow Servers are racked, cabled, and powered on.
• The system description contains a group.
This topic applies to a GV STRATUS server that is a Workflow Server.
1. In the Network Configuration | Devices tree view, right-click a group and select Add Device .
2013 12 19 GV STRATUS Installation and Service Manual 463
Complete system set up and configuration