Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 438)

7. Generate and/or add to host tables as appropriate for your network.
Related Topics
Adding a device to a network with SiteConfig on page 218
SiteConfig EDIUS XRE Server software install
Only systems with an EDIUS XRE Server require this process.
If you received your system pre-configured from Grass Valley, software is already installed, so you
can skip these tasks. Otherwise, work through the tasks in this section as follows:
• If your GV STRATUS system has one or more GV STRATUS servers that are EDIUS XRE
Servers, install software on those servers.
Installing software on an EDIUS XRE Server
Only systems with one or more GV STRATUS servers that are EDIUS XRE Servers require this
process. Use SiteConfig to install software on the server.
Prerequisites:
• The server on which you are installing software is in the SiteConfig system description and
communicating on the control network.
• The server on which you are installing software has its credentials set in SiteConfig to allow
access.
1. Verify the SiteConfig roles currently assigned to the server. If the roles are not correct for your
system design, add or remove roles accordingly. Roles are as follows:
• GV STRATUS Application
• GV STRATUS Event Viewer
• K2 FTP Server
• StorNext File System Client
• XRE Server
NOTE: If initial (not upgrade) install, first install GV STRATUS software, then install
EDIUS software.
2. Add the server to a deployment group, such as the EDIUS deployment group.
438 GV STRATUS Installation and Service Manual 2013 12 19
Complete system set up and configuration