Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 465)

SiteConfig Workflow Server software install
Only systems with a Workflow Server require this process.
If you received your system pre-configured from Grass Valley, software is already installed, so you
can skip these tasks. Otherwise, work through the tasks in this section as follows:
• If your GV STRATUS system has one or more GV STRATUS servers that are Workflow Servers,
install software on those servers.
If your GV STRATUS system has a single GV STRATUS Express server or a GV STRATUS Core
server and no Workflow Servers, the GV STRATUS Express server or GV STRATUS Core server
has Workflow Server software installed. Follow software installation instructions for the GV
STRATUS Express server or GV STRATUS Core server, rather than the instructions in this section.
Setting deployment options
Pre-requisites for this procedure are as follows:
• A software package has been assigned to the deployment group and applicable deployment tasks
are now displayed in the Tasks area.
1. In the Software Deployment | Deployment Groups tree view, select a deployment group.
2. In the Tasks list view, view tasks and determine if you must set deployment options.
Tasks that need to have deployment options set display in the Details column a message stating
"Deployment options required."
If you select a task that needs to have its deployment options set, the Start Deployment button
is disabled and the message is displayed next to the button.
3. Do one of the following to set deployment options:
• Double-click the task.
• Select the task and click the Options button.
A wizard opens.
2013 12 19 GV STRATUS Installation and Service Manual 465
Complete system set up and configuration