Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 469)

Depending on the workflow and bandwidth requirements of your system, Grass Valley may provide
a system design in which multiple engines of the same type run on one or more servers. Configure
engines as specified by your system design.
1. In the Control Panel application, open Engines settings.
Settings are described as follows:
Description Setting or button
Selects an Engine for which settings are saved. Configured
The name of a GV STRATUS server that hosts the Engine. Hostname
The Engine components installed on the GV STRATUS server. Engine Type
Indicates if the Engine service is running or stopped. Status
Starts and stops the Engine service. Action
Saves current settings to selected GV STRATUS servers. Save
Returns settings to their last saved state. Cancel
Updates the list. Refresh
2. Click Refresh to make sure the list has the latest information from SiteConfig.
3. Verify that GV STRATUS servers with one or more of the following roles are listed, with
corresponding Engine Types:
• GV STRATUS Workflow Engine
• GV STRATUS Rules Engine
• GV STRATUS Xcode Control Engine
2013 12 19 GV STRATUS Installation and Service Manual 469
Complete system set up and configuration