Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 325
3. Add the following files to the deployment group:
•
GrassValley_CoreServer_x.x.x.cab
, which contains the following cab files that apply to
this device:
•
GrassValley_STRATUS_IngestServices_x.x.x.cab
•
GrassValley_STRATUS_ControlPanelService_x.x.x.cab
•
GrassValley_STRATUS_CommonServices_x.x.x.cab
•
GrassValley_STRATUS_CoreServices_x.x.x.cab
•
GrassValley_STRATUS_ControlPanel_x.x.x.cab
•
GrassValley_STRATUS_HttpProxyServer_x.x.x.cab
•
GrassValley_STRATUS_DataMover_x.x.x.cab
•
GrassValley_STRATUS_DIVA_MDI_x.x.x.cab
•
GrassValley_STRATUS_GVEventViewer_x.x.x.cab
•
GrassValley_STRATUS_FlashNet_MDI_x.x.x.cab
•
GrassValley_STRATUS_GFTP_MDI_x.x.x.cab
•
GrassValley_STRATUS_Summit_MDI_x.x.x.cab
•
GrassValley_STRATUS_Proxy_Encoder_x.x.x.cab
•
GrassValley_STRATUS_Mediaflow_Engine_x.x.x.cab
•
GrassValley_STRATUS_Rules_Engine_x.x.x.cab
•
GrassValley_STRATUS_Transcode_Engine_x.x.x.cab
•
GrassValley_STRATUS_TrafficGateway_x.x.x.cab
•
GrassValley_Sabretooth_Application_x.x.x.cab
•
AuroraPlayout_x.x.x.cab
•
GrassValley_STRATUSClient_x.x.x.cab
, which contains the following cab files that apply
to this device:
•
GrassValley_STRATUS_ControlPanel_x.x.x.cab
•
GrassValley_STRATUS_Application_x.x.x.cab
(Use for test purposes only)
•
x
Refer to release notes for version numbers.
4. Do the SiteConfig
Check Software
operation on the server.
NOTE: If an "Unable to copy ... to target" error appears for a device that has Grass Valley
Embedded Security, put Embedded Security in Update mode.
5. Verify that deployment tasks are set to
Install
for the files listed above.
If a WFRegMon install task appears, install it as well. It is required to support Grass Valley
software installers. There is no uninstall task.
6. Deploy software to the server.
7. Restart as prompted.
Related Topics
Adding a software role to a device
on page 218
on page 376
Check all currently installed software on GV STRATUS devices
on page 69
2013 12 19
GV STRATUS Installation and Service Manual
325
Complete system set up and configuration