Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 398)

5. Type the following at the command prompt:
gdsminstall64.exe -i
6. Press Enter .
The software is installed. The command prompt window reports progress.
7. Restart the computer on which you installed MPIO.
8. After restart, to verify that the software is installed, on the Windows desktop right-click My
Computer and select Manage .
The Computer Management window opens.
9. In the left pane select Device Manager .
10. In the right pane open the System devices node and verify that GVG ISCSI Multi-Path Device
Specific Module is listed.
Configuring a GV STRATUS server on a K2 SAN
This section applies to a GV STRATUS server on an online or production K2 SAN.
1. In the K2Config application tree view, select the GV STRATUS server you are configuring.
2. Click the Configure button.
The Configure K2 Server wizard opens to the Define server roles page.
398 GV STRATUS Installation and Service Manual 2013 12 19
Complete system set up and configuration