Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 318)

13. Workflow Server set up process on page 463. Only systems with a Workflow Server require this
process. Use SiteConfig for network setup and software install. On the GV STRATUS Core
server, use SabreTooth and install the STRATUS-RULES license and optionally
STRATUS-XCODECONTROLCARBONCODER and
STRATUS-XCODECONTROLVANTAGE licenses.
K2 system set up process
All systems require this process.
If you received your K2 system already set up from Grass Valley, skip set up tasks and do the test
task only.
1. Installing SiteConfig on page 213. All system require this process.
2. Create a SiteConfig system description on page 318. All systems require this process.
3. Set up K2 systems on page 318. All systems require this process.
4. Test K2 systems on page 42. All systems require this process.
Create a SiteConfig system description
All systems require this process.
If you already have a system description supplied by Grass Valley, you can skip this task.
To create a system description for K2 SAN systems, refer to "K2 10G SAN Installation and Service
Manual" for instructions.
To create a system description for K2 standalone systems, refer to "K2 System Guide" for instructions.
Related Topics
About developing a system description on page 176
Set up K2 systems
All systems require this process.
If you received your K2 systems already set up by Grass Valley, you can skip this task.
Prerequisites for this task are as follows:
• K2 system devices are racked, cabled, and powered on.
318 GV STRATUS Installation and Service Manual 2013 12 19
Complete system set up and configuration