Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 341)

Prerequisites for initial configuration - Basic Proxy Storage
Before beginning your initial configuration, make sure the devices of the Proxy Storage system meet
the following prerequisites.
Control point PC
• Ethernet cable connected
• Control Point software installed
• Control network IP address assigned
• Network communication over the control network with all other K2 devices
• Power on
Ethernet switch
• Ethernet cables connected
• Control network IP address assigned
• VLANs set up
• Trunks set up
• Power on
Core Services server
• Ethernet cables connected
• Fibre Channel cable connected
• Software installed, as from the factory, including QuickTime 7
• Control network IP address assigned
• Power on for all servers
K2 RAID chassis
• Fibre Channel cable(s) connected
• Ethernet cable(s) connected
• Power on
K2 RAID Expansion chassis (optional)
• Fibre channel cable(s) connected
• Power on
2013 12 19 GV STRATUS Installation and Service Manual 341
Complete system set up and configuration