Proxy server/storage set up process, Siteconfig proxy server/storage network set up – Grass Valley GV STRATUS Installation v.3.1 User Manual
Page 329
Proxy Server/Storage set up process
Only systems with proxy on the K2 SAN (A1) or with proxy on dedicated Proxy Storage (B1, C1)
require this process. Use SiteConfig for network setup and software install, then use K2Config for
SAN setup.
If you received your proxy system already set up from Grass Valley, skip set up tasks and do the
test task only.
1.
SiteConfig Proxy Server/Storage network set up
on page 329. Only systems with proxy on the
K2 SAN (A1) or with proxy on a dedicated Proxy Storage system (B1, C1) require this process.
2.
SiteConfig Proxy Server/Storage software install
on page 332. Only systems with proxy on the
K2 SAN (A1) or with proxy on a dedicated Proxy Storage system (B1, C1) require this process.
3.
on page 336. Only systems with proxy on the K2 SAN (A1) require
this process.
4.
on page 340. Only systems with proxy on a dedicated Proxy
Storage system (B1, C1) require this process.
5.
Test Proxy systems
. All systems require this process.
SiteConfig Proxy Server/Storage network set up
Only systems with proxy on the K2 SAN (A1) or with proxy on a dedicated Proxy Storage system
(B1, C1) require this process.
If you received your system pre-configured from Grass Valley, your Proxy server or Proxy Storage
system is already included in the SiteConfig system description and set up on the network, so you
can skip these tasks. Otherwise, work through the tasks in this section as follows:
•
If your proxy assets are on an online or production K2 SAN (A1), start by adding the K2 SAN's
Proxy server to the SiteConfig system description.
•
If your proxy assets are on a dedicated Proxy Storage system (B1, C1), start by adding the Proxy
Storage system to the SiteConfig system description.
Adding a Proxy server to the SiteConfig system description
Prerequisites for this task are as follows:
•
The system description contains a group.
This topic applies to a K2 SAN's Proxy server, which is the GV STRATUS server with role of Proxy
Server attached to an online or production K2 SAN.
1. In the
Network Configuration | Devices
tree view, right-click a group and select
Add Device
.
2013 12 19
GV STRATUS Installation and Service Manual
329
Complete system set up and configuration