Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 95)

Description Setting or button
Specifies either SAN-attached K2 Summit system or Standalone K2
Summit system. When Standalone is selected, settings are as follows. Type of K2 device
The standalone K2 Summit system that this MDI accesses. Select K2 Standalone
The maximum number of concurrent transfers allowed. The maximum
is set in K2Config. You may select the maximum or a lesser number.
Refer to your system design. Maximum concurrent
transfers
The user name that this MDI uses to access the K2 Summit system.
This is the internal system account, which by default is GVAdmin. User Name
If on a domain, the domain that manages the account that this MDI
uses to access the K2 Summit system. Domain
The password that this MDI uses to access the K2 Summit system. For
GVAdmin the default password is
adminGV! .
Password
The FTP server name for the K2 Summit system this MDI accesses.
Typically this is the name of the standalone K2 Summit system with
the
_he0 suffix added.
FTP Server Name
The FTP user name for the K2 Summit system this MDI accesses.
Typically this is
movie .
FTP User Account
The FTP password for the K2 Summit system this MDI accesses. When
this field is blank the system automatically uses the default password. FTP Password
Related Topics
MDI and Encoder logical names convention on page 183
Configuring Summit MDI settings: Required for standalone on page 366
Summit MDI SAN settings
These Summit MDI settings for SAN and/or Summit MDI settings for standalone are required on
all GV STRATUS systems.
This type of MDI manages K2 Summit Production Client systems. This topic describes settings for
a K2 Summit SAN system.
To locate these settings, click Tools | Core | STRATUS Core Services | MDI Configuration | Add | Summit
2013 12 19 GV STRATUS Installation and Service Manual 95
Reference to GV STRATUS Control Panel settings