Grass Valley GV STRATUS Installation v.3.1 - Manual (Page 259)

11. Then, go to the System Configuration page and select Latency from the Optimization dropdown
list.
Related Topics
Configuring Virtual COM port (Jupiter only) on page 254
Configuring Jupiter-AccuSwitch router control
Prerequisites:
• The Jupiter Control System CM 4000 with AccuSwitch application must be connected to the
Jupiter File Server (Configuration PC) via an IP hub, switch, or media converter. Make sure you
have the CM4000 MAC address prior to the configuration.
• The Jupiter Network Suite (JNS) Control Console software must be installed on the Configuration
PC. Refer to Jupiter customer documentation for the compatible version of the control software.
• You must have administrator privileges in order to load Jupiter software, launch Jupiter
applications, and configure the system.
The Jupiter Network Suite (JNS) Control Console software on the Configuration PC provides an
interface to the Jupiter Control system CM 4000 through the LAN.
2013 12 19 GV STRATUS Installation and Service Manual 259
Administering and maintaining the GV STRATUS system