Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 10)

10 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
i.1 Preface
i.1 Preface
Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection
and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa
accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances
should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without
exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All systems
or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa
must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in
conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR
IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims
arising from misapplication of its products.
This manual is designed to ensure correct and suitable application of R1000-Series Regenerative Units. Read this manual
before attempting to install, operate, maintain, or inspect a regenerative unit and keep it in a safe, convenient location for
future reference. Be sure you understand all precautions and safety information before attempting application.
◆ Applicable Documentation
The following manuals are available for R1000 series:
◆ Symbols
Note: Indicates a supplement or precaution that does not cause regenerative unit damage.
◆ Terms and Abbreviations
• Regenerative Unit: YASKAWA R1000 Series Power Regenerative Unit
• Drive: Yaskawa 1000-Series Drive
• BCD: Binary Coded Decimal
• H: Hexadecimal Number Format
• IGBT: Insulated Gate Bipolar Transistor
◆ Trademarks
• MECHATROLINK-I/MECHATROLINK-II are trademarks of MECHATROLINK Members Association (MMA).
• Other companies and product names mentioned in this manual are trademarks of those companies.
YASKAWA R1000 Series
Power Regenerative Unit
Instruction Manual (TOEP C710656 08)
This guide is packaged together with the product and contains basic information required to install and wire the
regenerative unit. It also gives an fault diagnostics, maintenance, and parameter settings. The purpose of this guide is to
prepare the regenerative unit for a trial run with an application and for basic operation.
TOEP_C710656_08B_1_0.book 10 ページ ２０１５年２月５日 木曜日 午前１０時７分