Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 83)

4.7 Test Run Checklist
YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual 83
S
ta
rt
-Up Pr
ogr
amming
&
O
p
er
at
io
n
4
4.7 Test Run Checklist
Review the checklist before performing a test run. Check each item that applies.
No. Checklist Page
1 Thoroughly read the manual before performing a test run. –
2 Check the Wiring Checklist on page 66 . 66
3 Set the correct power supply voltage. 76
4 Turn on the power supply to the regenerative unit and drive. 76
5 Correctly sequence the Run commands. 77
6 The should light after giving a Run command. –
7 To give Run command from the digital operator, press key to set to LOCAL. 69 , 74
8
To give Run command from the control circuit terminals, press the to set REMOTE. (The LO/
RE indicator is lit off while REMOTE is set.)
74
RE
LO
RE
LO
TOEP_C710656_08B_1_0.book 83 ページ ２０１５年２月５日 木曜日 午前１０時７分