Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 168)

B.2 Parameter Tables
168 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
◆ U: Monitors
Monitor parameters allow the user to view regenerative unit status, fault information, and other data concerning
regenerative unit operation.
o4-12
(512H)
kWh Monitor
Initialization
kWh Monitor Init
0: No Reset
1: Reset
0: U4-10 and U4-11 monitor data is not reset when the
regenerative unit is initialized (A1-03).
1: U4-10 and U4-11 monitor data is reset when the
regenerative unit is initialized (A1-03).
Default: 0
Min.: 0
Max.: 1
o4-13
(528H)
Number of Run
Commands Counter
Initialization Run Counter Init
0: No Reset
1: Reset
0: Number of Run commands counter is not reset when the
regenerative unit is initialized (A1-03).
1: Number of Run commands counter is reset when the
regenerative unit is initialized (A1-03).
Default: 0
Min.: 0
Max.: 1
o4-19
(113AH)
Power Unit Price Cost per 1 kWh
This parameter is used to calculate the power rate that is
displayed for User Monitors U9-07 through U9-14.
Set the price per 1 kWh. Default: 000.00
Min.: 000.00
Max.: 650.00
<7> Parameter is available in software versions PRG: 2003 and later.
No.
(Address
Hex)
Name
LCD
Display
Description
Analog
Output
Level
Unit
U1: Operation Status Monitors
U1-10
(49H)
Input Terminal
Status Input Term
Sts
Displays the input terminal status.
No signal
output
available
–
U1-11
(4AH)
Output Terminal
Status Output
Term Sts
Displays the output terminal status.
No signal
output
available
–
No.
(Address
Hex)
Name LCD Display Description Values
U1 - 10= 0 0 0 0 0 0 0 0
Digital input 1
(terminal S1 enabled)
Digital input 2
(terminal S2 enabled)
Digital input 3
(terminal S3 enabled)
Digital input 4
(terminal S4 enabled)
Digital input 5
(terminal S5 enabled)
Digital input 6
(terminal S6 enabled)
Digital input 7
(terminal S7 enabled)
Digital input 8
(terminal S8 enabled)
1: ON 0: OFF
U1 - 11= 0 0 0 0 0 0 0 0
Multi-Function Relay Output
(terminal M1-M2)
Multi-Function Relay Output
(terminal M3-M4)
Multi-Function Relay Output
(terminal M5-M6)
Reserved
Fault Relay
(terminal MA/MB-MC closed
MA/MB-MC open)
1: ON 0: OFF
YAI
TOEP_C710656_08B_1_0.book 168 ページ ２０１５年２月５日 木曜日 午前１０時７分