Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 24)

24 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
2.1 Section Safety
2.1 Section Safety
W ARNING
Fire Hazard
Ensure proper cooling when installing an IP00/IP20 regenerative unit in a closed panel or cabinet.
Ensure the air temperature entering the regenerative unit is 50
° C (122 ° F) or cooler by use of a cooling fan or air
conditioner. Failure to comply could result in overheating and fire.
Crush Hazard
Only allow qualified personnel to operate a crane or hoist to transport the unit.
Failure to comply may result in serious injury or death from falling equipment.
Use a dedicated lifter when transporting the unit by a lifter.
Failure to comply may result in serious injury or death from falling equipment.
Only use vertical suspension to temporarily lift the unit during installation to an enclosure panel.
Do not use vertical suspension to transport the unit.
Failure to comply may result in serious injury or death from falling equipment.
Use screws to securely affix the unit front cover, terminal blocks, and other unit components prior to vertical
suspension.
Failure to comply may result in serious injury or death from falling equipment.
Do not subject the unit to vibration or impact greater than 1.96 m/s 2 (0.2 G) while it is suspended by the cables.
Failure to comply may result in serious injury or death from falling equipment.
Do not attempt to flip the unit over or leave the unit unattended while it is suspended by the wires.
Failure to comply may result in serious injury or death from falling equipment.
CAUTION
Crush Hazard
Do not carry the unit by the front cover or the terminal cover.
Failure to comply may result in minor or moderate injury from the main body of the unit falling.
TOEP_C710656_08B_1_0.book 24 ページ ２０１５年２月５日 木曜日 午前１０時７分