Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 155)

B.2 Parameter Tables
YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual 155
Par
ame
te
r Li
st
B
B.2 Parameter Tables
◆ A: Initialization Parameters
The A parameter group creates the operating environment for the regenerative unit. This includes the parameter Access
Level, Control Method, Password, User Parameters and more.
: Indicates that the parameter setting can be changed while the regenerative unit is operating.
No.
(Address
Hex)
Name LCD Display Description Values
A1: Initialization
<1> Parameter setting value is not reset to the default value when the regenerative unit is initialized.
A1-00
(100H)
<1>
Language Selection
Select Language
0: English
1: ニホンゴ (Japanese)
7: Chinese
0: English
1: Japanese
7: Chinese Default: 0
Min.: 0
Max.: 7
A1-01
(101H) Access Level
Selection
Access Level
0: Operation Only
1: User Parameters
2: Advanced Level
0: View and set A1-01 and A1-04. U†-†† parameters
can also be viewed.
1: User Parameters (access to a set of parameters selected
by the user, A2-01 to A2-32)
2: Advanced Access (access to view and set all
parameters)
Default: 2
Min.: 0
Max.: 9999
A1-03
(103H)
Initialize Parameters
Init Parameters
0: No Initialize
1110: User Initialize
2220: 2-Wire Initial
3330: 3-Wire Initial
5550: oPE04 error reset 0: No initialization
1110: User Initialize (parameter values must be stored
using parameter o2-03)
2220: 2-Wire initialization
3330: 3-Wire initialization
5550: oPE04 error reset
Default: 0
Min.: 0
Max.: 5550
A1-04
(104H)
Password Enter Password When the value set into A1-04 does not match the value set
into A1-05, parameters A1-01 through A1-03, A1-06, and
A2-01 through A2-33 cannot be changed. Default: 0000
Min.: 0000
Max.: 9999
A1-05
(105H)
Password Setting Select Password
A2: User Parameters
A2-01
(106H)
User Parameters 1 User Param 1
Recently edited parameters are listed here. The user can
also select parameters to appear here for quicker access.
Default: b1-02
Range: A1-00 to
o4-19
A2-02
(107H)
User Parameters 2 User Param 2
Default: b1-21
Range: A1-00 to
o4-19
A2-03
(108H)
User Parameters 3 User Param 3
Default: –
Range: A1-00 to
o4-19
A2-04 to
A2-32
(109H to
125H)
User Parameters 4 to
32
User Param 4 - 32
Default: –
Range: A1-00 to
o4-19
A2-33
(126H)
User Parameter
Automatic Selection
User Parms Sel
0: Disabled
1: Enabled
Determines whether recently edited parameters are saved
to the second half of the User Parameters (A2-17 to A2-32)
for quicker access.
0: Parameters A2-01 to A2-32 are reserved for the user to
create a list of User Parameters.
1: Save history of recently viewed parameters. Recently
edited parameters will be saved to A2-17 through A2-32
for quicker access.
Default: 0
Range: 0 to 1
TOEP_C710656_08B_1_0.book 155 ページ ２０１５年２月５日 木曜日 午前１０時７分