Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 137)

7.1 Section Safety
YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual 137
St
an
d
ar
d
C
o
n
fi
g
u
rat
io
n De
vi
ce
s,
P
er
ip
h
er
al
Dev
ices
, a
nd Opt
ions
7
NOTICE
Observe proper electrostatic discharge procedures (ESD) when handling the unit and circuit boards.
Failure to comply may result in ESD damage to the unit circuitry.
Do not use unshielded cable for control wiring.
Failure to comply may cause electrical interference resulting in poor system performance. Use shielded, twisted-pair
wires and ground the shield to the shield ground terminal E (G) of the unit.
Check all the wiring to ensure that all connections are correct after installing the unit and connecting any other
devices.
Failure to comply could result in damage to the unit.
Do not operate damaged equipment.
Failure to comply could result in further damage to the equipment.
Do not connect or operate any equipment with visible damage or missing parts.
TOEP_C710656_08B_1_0.book 137 ページ ２０１５年２月５日 木曜日 午前１０時７分