Yaskawa R1000 Series Power Regenerative Unit - Manual (Page 212)

D.3 UL Standards
212 YASKAWA ELECTRIC TOEP C710656 08B YASKAWA Power Regenerative Unit - R1000 Instruction Manual
Closed-Loop Crimp Terminal Recommendations
Yaskawa recommends UL Listed or CSA Certified crimp terminals made by JST and Tokyo DIP (or equivalent) for the
insulation cap.
Table D.4 matches the wire gauges and terminal screw sizes with Yaskawa-recommended crimp terminals,
tools, and insulation caps. Refer to the appropriate Wire Gauge and Torque Specifications table for the wire gauge and
screw size for your regenerative unit model. Place orders with a Yaskawa representative or the Yaskawa sales department.
The closed-loop crimp terminal sizes and values listed in
Table D.4 are Yaskawa recommendations. Wire gauge values
shown in Table D.4 are the recommended values. Refer to local codes for proper selections.
Table D.4 Closed-Loop Crimp Terminal Size
4A0105
R/L1, S/L2, T/L3 2/0 2/0 to 300 M10
18.0 to 23.0
(159 to 204)
, 4/0 4/0 to 300 M10
18.0 to 23.0
(159 to 204)
r1/ 11, 1/ 21, t1/ 31 14 14 to 10 M4
1.1 to 1.2
(9.7 to 10.6)
1 1 to 300 M10
18.0 to 23.0
(159 to 204)
4A0150
R/L1, S/L2, T/L3 250 250 to 300 M12
32.0 to 40.0
(283 to 354)
, 3/0 × 2P 3/0 to 600 M12
32.0 to 40.0
(283 to 354)
r1/ 11, 1/ 21, t1/ 31 14 14 to 10 M4
1.1 to 1.2
(9.7 to 10.6)
1/0 1/0 to 300 M12
32.0 to 40.0
(283 to 354)
4A0210
R/L1, S/L2, T/L3 3/0 × 2P 3/0 to 600 M10
18.0 to 23.0
(159 to 204)
, 4/0 × 2P 4/0 to 600 M10
18.0 to 23.0
(159 to 204)
r1/ 11, 1/ 21, t1/ 31 14 14 to 10 M4
1.1 to 1.2
(9.7 to 10.6)
2/0 2/0 to 350 M10
18.0 to 23.0
(159 to 204)
4A0300
R/L1, S/L2, T/L3 250 × 2P 250 to 600 M12
32.0 to 40.0
(283 to 354)
, 400 × 2P 400 to 600 M12
32.0 to 40.0
(283 to 354)
r1/ 11, 1/ 21, t1/ 31 14 14 to 10 M4
1.1 to 1.2
(9.7 to 10.6)
4/0 4/0 to 350 M12
32.0 to 40.0
(283 to 354)
Model
Wire Gauge (AWG, kcmil) Screw
Size
Crimp Terminal
Model Number
Tool Insulation Cap
Model No.
Code <1>
R/L1,S/L2,T/L3 , Machine No. Die Jaw
200 V Class
2A03P5
12
M4
R5.5-4 YA-4 AD-900 TP-005 100-054-029
10 R5.5-4 YA-4 AD-900 TP-005 100-054-029
8 8-4 YA-4 AD-901 TP-008 100-054-031
6 14-NK4 YA-4 AD-902 TP-014 100-054-033
2A0005
12 –
M4
R5.5-4 YA-4 AD-900 TP-005 100-054-029
10 R5.5-4 YA-4 AD-900 TP-005 100-054-029
8 8-4 YA-4 AD-901 TP-008 100-054-031
6 14-NK4 YA-4 AD-902 TP-014 100-054-033
Model Terminal
Recommended
Gauge
AWG, kcmil
Applicable Gauge
AWG, kcmil
Screw Size
Tightening Torque
Nxm (lbxin.)
– +
– +
– +
– +
– +
TOEP_C710656_08B_1_0.book 212 ページ ２０１５年２月５日 木曜日 午前１０時７分