Dynon Avionics SkyView System Installation Guide - Manual (Page 120)

SV-EMS-220/221 Installation and Configuration
7-8 SkyView System Installation Guide - Revision S
Pin
EMS 37-pin
Harness Wire
Color
Function Sensor Config
1 Red Voltmeter 1 (0 to 30 volts DC)
2 Yellow or Unwired Voltmeter 2 (0 to 30 volts DC)
3 Black Ground
4 Violet/Blue General Purpose Input 1 A
5 Black Ground
6 White/Yellow General Purpose Input 11 B
7 White/Brown General Purpose Input 12 A
8 Brown Enhanced General Purpose Input 4 C
9 Brown/Blue General Purpose Input 5 A
10 Brown/Yellow General Purpose Input 6 A
11 Orange General Purpose Input 7 A
12 Yellow General Purpose Input 8 A
13 Black Ground
14 Yellow Fuel Flow Input 1
15 Red Auxiliary 12 volt DC Output
16 Black Ground
17 Black Ground
18 White/Red Auxiliary 5 volt DC Output
19 White/Black Fuel Flow Input 2 (Return)
20 Orange/Brown General Purpose Input 9 A
21 Orange/Blue General Purpose Input 10 A
22 Violet/Yellow Enhanced General Purpose Input 2 C
23 Violet/Green Enhanced General Purpose Input 3 C
24 Orange/Green Amps + Amps Shunt
25 Orange/Violet Amps - Amps Shunt
26 Green/Red Manifold Pressure Input
Manifold Pressure
(100434-000)
27 Open General Purpose TC Input 1+ (SV-EMS-220 only)
Thermocouple (SV-EMS-
220 only)
28 Open General Purpose TC Input 1- (SV-EMS-220 only)
Thermocouple (SV-EMS-
220 only)
29 Yellow/Green Warning Light
Optional External Alarm
Light
30 Black Ground
31 White/Orange Enhanced General Purpose Input 13 C
32 White/Green Standard RPM Input Left
33 White/Blue Standard RPM Input Right