Dynon Avionics SkyView System Installation Guide User Manual
Page 289
SV-COM-C25 Installation, Configuration, and Testing
SkyView System Installation Guide – Revision S
16-7
Additional harness construction and wiring information can be found in Appendix C: Wiring and
Electrical Connections.
The SV-COM-PANEL has two (electrically identical) D9 male connectors for connection to
SkyView Network and one D15 male connector for connection with the SV-COM-425 and an
optional Frequency Flip/Flop pushbutton input.
The SV-COM-425 has one D15 male connector for connection to the SV-COM-PANEL, power,
audio, and Push to Talk (PTT). A single BNC coaxial connector attaches to the antenna.
SV-COM-PANEL – Pinout (Male D15)
Pin
Function
Notes
1
Power In
From SV-COM-425 Pin 7
2
Ground In
From SV-COM-425 Pin 13
3
Ground Out
Optional - For Grounding Pin 7
(Flip/Flop Switch). Switch may also be
grounded locally.
4
Panel RX / 425 TX
From SV-COM-425 Pin 6
5
Panel TX / 425 RX
From SV-COM-425 Pin 14
6
Enable
From SV-COM-425 Pin 3
7
External Flip/Flop
(optional)
Push Button Normally Open to
Ground (Pin 3 or local ground)
8
No Connection
(Pin not used)
9
No Connection
(Pin not used)
10
No Connection
(Pin not used)
11
No Connection
(Pin not used)
12
No Connection
(Pin not used)
13
No Connection
(Pin not used)
14
No Connection
(Pin not used)
15
No Connection
(Pin not used)
Table 56 – SV-COM-PANEL male D15 Pinout