Dynon Avionics SkyView System Installation Guide - Manual (Page 339)

SkyView System Installation Guide - Revision S 20-1
20. Appendix A: Maintenance and Troubleshooting
This appendix provides builders, installers and technicians basic information regarding SkyView
maintenance and troubleshooting.
Dynon’s internet sites may provide more up-to-date information on maintenance and
troubleshooting than this document. The following sites should be used a reference:

http://docs.dynonavionics.com – Dynon's documentation download area allows customers
(and prospective customers) to download the most up-to-date versions of all Dynon
documentation. Older versions of Dynon documentation may be shipped with OEM and
dealer-provided units, so it is a good idea to periodically check for new versions of
documentation.

http://wiki.dynonavionics.com – Dynon’s Documentation Wiki provides additional technical
information on Dynon products.

http://forum.dynonavionics.com Dynon’s Online Customer Forum is a resource for Dynon
Avionics customers to discuss installation and operational issues relating to Dynon Avionics
products. The Forum is especially useful for pilots with uncommon aircraft or unusual
installation issues. For customers that cannot call Dynon Technical Support during our
normal business hours, the Forum is a convenient way to interact with Dynon Avionics
Technical Support. The Forum allows online sharing of wiring diagrams, photos, and other
types of electronic files.
Dynon Technical Support is available 7:00 AM–4:00 PM (Pacific Time) Monday – Friday. For
phone support, call +1(425) 402-0433. Email our tech support staff at
[email protected] .
There are no user-serviceable parts (such as replaceable fuses) inside any SkyView
system unit. Refer all servicing to Dynon Avionics.
Recording a Screenshot
It is sometimes helpful to have a screenshot of a behavior to share with Dynon Technical
Support. To accomplish this:

Insert a USB flash drive into your SkyView USB port.

When you want to save a screenshot of the display, press buttons 2 and 7 on that display
simultaneously. SkyView will display a message indicating that a screenshot has been saved.

The screenshot can be found in the “screenshots” folder on the USB flash drive when the
USB flash drive is connected to a computer.
Returning SkyView Components to Service after Repair
SkyView Network enabled components such as modules and servos are shipped in a “like new”
state after repair. To return a SkyView Network component to SkyView Network, follow the