Dynon Avionics SkyView System Installation Guide - Manual (Page 297)

SV-COM-C25 Installation, Configuration, and Testing
SkyView System Installation Guide – Revision S 16-15
SV-COM-425
Pin
SV-COM-PANEL
Pin
Notes
3 6
ENABLE
SV-COM-425 -> SV-COM-PANEL
7 1
POWER
SV-COM-425 -> SV-COM-PANEL
13 2
GROUND
SV-COM-425 -> SV-COM-PANEL
14 5
DATA OUT
SV-COM-PANEL -> SV-COM-425)
6 4
DATA IN
SV-COM-425 -> SV-COM-PANEL
Table 59 – SV-COM-PANEL to SV-COM-425 Interconnections
Optional Flip / Flop Button
Pin 7 of the SV-COM-PANEL can be connected to a Push Button Normally Open (PBNO) and
GROUND. Pushing this button “flip flops” the ACTIVE and STANDBY frequency selection - the
same function as pressing in the TUNE knob on the SV-COM-PANEL. Typically this signal is used
with a button on the stick.