Dynon Avionics SkyView System Installation Guide - Manual (Page 138)

SV-EMS-220/221 Installation and Configuration
7-26 SkyView System Installation Guide - Revision S
Pin
EMS 25-pin Thermocouple
Harness Wire Color
Sensor (with Dynon part number if
applicable)
1 Open N/A
2 Open N/A
3 Open N/A
4 Open N/A
5 Open N/A
6 Red N/A
7 Red N/A
8 Red N/A
9 Red N/A
10 Red N/A
11 Red EGT 2 (K-type thermocouple, 100405-000*)
12 Red N/A
13 Red EGT 1
14 Open N/A
15 Open N/A
16 Open N/A
17 Open N/A
18 White N/A
19 Yellow N/A
20 White N/A
21 Yellow N/A
22 White N/A
23 Yellow EGT 2
24 White N/A
25 Yellow EGT 1
Table 31 – Example Rotax 912 25-pin Connector Sensor Map
* Note that J-type and K-type thermocouples apply to all CHTs or EGTs, respectively. They are
not repeated in the table for brevity’s sake.
Example
Rotax
912 iS
(SV-
EMS-
221)Pin
EMS 37-pin Harness
Wire Color
Sensor (with Dynon part number if
applicable)
1 Red Battery voltage (voltmeter input)
2 Yellow or Unwired Not connected
3 Black Available ground
4 Violet/Blue Not connected
5 Black Available ground
6 White/Yellow Not connected