Dynon adahrs serial data format -2 – Dynon Avionics SkyView System Installation Guide User Manual

Page 384

Advertising
background image

Appendix E: Serial Data Output

24-2

SkyView System Installation Guide - Revision S

DYNON ADAHRS Serial Data Format

The following section details the format of DYNON ADAHRS serial output data:

Position

Width

Name

Description

1

1

Start
Character/Data
Type

'!'

2

1

Data Type

1 = ADAHRS data. Other Dynon formats look
similar, and may be interleaved. This bit tells you
what kind of data will follow.

3

1

Data Version

Currently 1. This is the version of the data
represented below and will change if there is a
future version that changes data. Has not
changed to date.

4

8

System Time

HHMMSSFF, current Zulu time according to
SkyView's internal clock which is synchronized
with GPS time if GPS is available. HH is the hour
from 00 to 23. MM is the minute from 00 to 59.
SS is the second from 00 to 59. HHMMSS are '-----
---' if GPS time has never been available. FF is the
1/16-second fraction counter from 00 to 15,
and may skip digits if baud rate is too low to send
data at 16Hz.

12

4

Pitch (deg)

+/- then 000 to 900, pitch up or down from level
flight in degrees * 10 (900 = 90°), positive
meaning the aircraft is pitched up. XXXX when
not available.

16

5

Roll (deg)

+/- then 0000 to 1800, roll left or right from level
flight in degrees * 10 (1800 = 180°), positive
meaning the aircraft is banked right. XXXXX when
not available.

21

3

Magnetic Heading
(deg)

000 to 359 in degrees. XXX when not available.

24

4

Indicated Airspeed
(knots)

0000 to 9999, indicated airspeed in units of knots
* 10 (1234 = 123.4 knots). XXXX when not
available.

28

6

Pressure Altitude
(ft)

+/- then 00000 to 99999, altitude in units of feet,
at a baro setting of 29.92" Hg, positive meaning
altitude is above sea-level. XXXXXX when not
available.

Advertising