Dynon Avionics SkyView System Installation Guide - Manual (Page 354)

Appendix B: Specifications
21-4 SkyView System Installation Guide - Revision S
SV-XPNDR-261 Specifications
Specification Characteristics
Compliance
ETSO 2C112b Class 1 Level 2els, ETSO
C166a Class B0, TSO C112c Class 1 Level
2els, TSO C166b Class B1S
FCC Identification VZI00745
Applicable documents
EUROCAE ED-73C, EUROCAE ED-14F (RTCA
DO-160F), RTCA DO-181D, RTCA DO-260B
Software ED-12B (RTCA DO-178B) Level B
Hardware DO-254 Level C
Power Requirements
11 – 33 Volts DC. Typical 6 Watts @
14Volts.
Altitude 35,000 feet
Humidity
95% @ +50°C for 6 hours; 85% @ +38°C for
16 hours.
Tested to Category A in DO-160F
Operating
Temperature
-20°C to +70°C
Transmitter Frequency 1090MHz ± 1MHz
Transmitter Power
250 Watts nominal; 125 Watts minimum at
antenna after allowing for 0.5dB connector
losses and 1.5dB cable losses.
Transmitter
Modulation
6M75 V1D
Receiver Frequency 1030 MHz
Receiver Sensitivity -74Dbm ± 3Db
Physical Specifications (in the mounting tray)
Height 48mm (1.9”)
Width 66mm (2.5”)
Length 160mm (6.3”)
Weight 0.77lbs. (350 g)
Table 68 – SV-XPNDR-261 Specifications