Dynon Avionics SkyView System Installation Guide User Manual
Page 303
Advertising
SkyView System Installation Guide - Revision S
17-1
17. SV-COM-X83 Installation, Configuration, and Testing
Note: SV-COM-X83 is the complete radio system, consisting of the SV-COM-PANEL
control panel installed on the panel, and the SV-COM-T8 transceiver installed
elsewhere.
Installation instructions for the SV-INTERCOM-2S (referenced in these instructions)
has its own, separate manual with much more technical detail than is included in
this guide, available for download at
Do not transmit without an antenna connected. Doing so will damage your SV-
COM-X83.
Figure 105 – Suggested SV-COM-X83 Installation, Configuration, and Testing Procedure
Advertising