How to load and delete files -17, How to export data logs and waypoints -17 – Dynon Avionics SkyView System Installation Guide User Manual
Page 61
Basic SkyView Display Operation
SkyView System Installation Guide – Revision S
3-17
How to Load and Delete Files
1.
Download file from
such as terrain or EMS files or
use another source for the SkyView file.
2.
Copy the file onto your USB flash drive. The file must be in the root directory of the drive
in order to be recognizable by the display.
3.
Insert the USB flash drive into one of the display’s USB sockets.
4.
Go to the Load Files Wizard (SETUP MENU > SYSTEM SOFTWARE > LOAD FILES…).
5.
Select a file and press:
a.
LOAD to load the file onto the system.
b.
CANCEL to return to the System Software Menu.
c.
REMOVE to delete the file from the USB flash drive.
How to Export Data Logs and Waypoints
EXPORT DATA LOGS
Data logging, and how to export datalogs is discussed in depth in Appendix F: User Data Logs.
EXPORT USER WAYPOINTS
This option exports all of the User Waypoints that are currently stored in your SkyView system.
EXPORT DYNON DIAGNOSTIC FILE
This specialized data log can only be interpreted by Dynon Avionics Engineers; there is no data
in it that can be interpreted by customers. Dynon Avionics Technical Support may request this
log in the course of troubleshooting, especially for issues related to AP performance. Note that
this log is very big – over 500 MB – and takes minutes to save to a USB flash drive. Unless
directed to export this log by Dynon Avionics, there is no reason to do so. Dynon Avionics
Technical Support will provide a link to directly upload this file to Dynon Avionics (it’s too big to
be emailed).
If you have more than one SkyView display in your system, you may be requested to save the
Dynon Diagnostic File from each of your SkyView displays as each display can sometimes
contain different diagnostic data. If you save the Dynon Diagnostic File from multiple displays
onto the same USB flash drive, use the 33-character name field to distinguish the two files, such
as naming one “LEFT” and the other one “RIGHT”.