Nortel Networks 1000M - Manual (Page 118)

118 Mounting the chassis
• eight 25 mm (1 in.) #12 wood screws supplied in the bracket kit (or other
appropriate fasteners) to fasten the wall shelf brackets to the wall
• one 20 mm (3/4 in.) piece of plywood fastened to the wall
The NTTK11 bracket kit contains all of the above items, with the exception
of the equipment layout plan and the plywood.
DANGER
A chassis is 13.5 kg (30 lb) with circuit cards installed. Make sure
that you fasten the equipment securely to the wall. Use fasteners
designed to hold securely to the type of surface that will support
the equipment. When using 20 mm (3/4 in.) plywood, or other
similar material as a backboard, make sure you attach it directly to
the wall studs in a minimum of six places.
Refer to Figure 50 "Typical layout for installing the chassis on a wall in a
horizontal position" (page 119) for guidelines on how to position system
components.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.