Nortel Networks 1000M - Manual (Page 220)

220 Installing and connecting cross-connect terminals
2 Install the terminal blocks in a layout similar to that shown:
• in Figure 104 "Typical Krone cross connect terminal layout for the
Cabinet system" (page 221) for the Cabinet system
• in Figure 104 "Typical Krone cross connect terminal layout for the
Cabinet system" (page 221) for the Chassis system
3 Attach labels on the cross-connect terminal to indicate the terminal
blocks assigned to the following:
• AUX wiring
• Power Failure Transfer Units (PFTU)
• Telephones and consoles
• Analog line cards
• DC5/AC15/RAN/PAG cards
• Data Access Cards
• Digital line cards
• Exchange line trunk cards
• Direct Dialing Inward trunk cards
• other miscellaneous equipment
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.