Nortel Networks 1000M - Manual (Page 124)

124 Connecting the chassis expander to the chassis
(labeled as Expansion Cabinet DS-30/CE-MUX Conn) to the
CE-MUX connector at the back of the Chassis Expander.
Note: To ensure correct usage, one end of the NTDK95 cable is
designated to connect to the expansion cabinet.
3 Tighten the screws on the connectors.
4 Connect the other NTDK95 cable (non-labeled side) to the DS-30X
connector at the back of the Chassis and labeled side of NTDK95
(labeled as Expansion Cabinet DS-30/CE-MUX Conn) to the DS-30X
connector at the back of the Chassis Expander.
5 Tighten the screws on the connectors.
Note: The Chassis Expander Cable Kit (NTDK89) contains two
NTDK95 cables.
Figure 54 "The chassis and chassis expander connected with the
two NTDK95 CE-MUX/DS-30X bus cables" (page 125)
shows the
chassis and chassis expander connected with the two NTDK95
cables.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.